2000 Series-High Profile Dock & Components
Float Sections
Model FS2120
- 72″ x 120″ x 20″
- 182.9 cm x 304.8 cm x 51 cm
- Weight: 428 lbs. (194 Kg)
- Color: Gray Oak
The primary component of the Connect-A-Dock system is molded of maintenance-free plastic with connector sockets for simple and extendable slip-fit connectors.
Model FS2096
- 48″ x 96″ x 20″
- 122 cm x 244 cm x 51 cm
- Weight: 200 lbs. (90.7 Kg)
- Color: Gray Oak
The primary component of the Connect-A-Dock system is molded of maintenance-free plastic with connector sockets for simple and extendable slip-fit connectors.
Model FS2024
- 48″ x 24″ x 20″
- 121.92 cm x 60.96 cm x 50.8 cm
- Weight: 70 lbs. (31.75 Kg)
- Color: Gray Oak
The 2 x 4 Float
Section enables you to add more square footage where a small addition is needed.
Model CFS2022
- 48″ x 67″ x 20″
- 121.9 cm x 170.1 cm x 50.8 cm
- Weight: 75 lbs. (34 Kg)
- Color: Gray Oak
Adds strength, stability and extra walking space to the fingers of your dock.
Components
Utility Channel Straight
Model UTC2048
Color: Gray Oak
47.91″ x 47.91″ x 20″ (121.7 cm x 121.7 cm x 50.8 cm)
Add water, electrical or sewer conduit to your floating dock
Utility Channel Cube
Model UT2024
Color: Gray Oak
23.81″ x 24″ x 20″ (60.47 cm x 60.96 cm x 50.8 cm)
Add water, electrical or sewer conduit to your floating dock
Utility Channel Corner
Model UT2048
Color: Gray Oak
49.56″ x 24″ x 20″ (125.88 cm x 60.96 cm x 50.8 cm)
Add water, electrical or sewer conduit to your floating dock
Extra Flotation
Model EF2020
This accessory adds 300 pounds (136.1 Kg) of extra buoyancy to your 2000 Series Connect-A-Dock wherever additional flotation is required. Extra Flotation should always be placed where gangways are located. Just slip fit the Extra Flotation into the air chamber located on the underside of the Float Section prior to placement on the water.
Float Connector
Model FC2020
Float Connectors are used to attach Float Sections. They are hidden from view in slip-fit connector sockets and secured with two bolts, washers and bushings. (Hardware included)
Extra Hardware
Model EH2000 (for docks)
Extra bolt, diamond
washer and bushing for those times when extra dock hardware is needed.
2" & 3" Pole Connector
2″ Model PC2022
3″ Model PC2023
The versatile Pole Connector slip-fits into the exposed connector sockets of Float Sections and can accommodate a variety of anchoring methods, depending on your location and needs.
Dual Pole Connector
Model DPC2023
Two connection points for added strength.
Order separately – Two Float Connectors
Maximum pole size 3”
Pole Cover
Model PC1002
Cover those unsightly anchor pole tops with the easily-installed and durable Pole Cover.
Series-High Profile Bumper
Model DB2000
2000 Bumper attaches in the float section sockets
10.6″x 10.6″x 20″
(26.9 cm x 26.9 cm x 51 cm)
Finishing Connector
Model FC2000
Give the side walls of your 2000 Series Connect-A-Dock an attractive finished appearance and keep debris out of the connector sockets by filling them with Finishing Connectors. (Hardware included)
Accessory Connector
Model AC2000
Add functional and attractive accessories to the outside walls of your dock with the Accessory Connector. Items such as oak boards and bumpers can be fastened to the Accessory Connector quickly and easily. (Hardware included)
Cleat
Model 8C1020
7” x 1.35” (17.78 cm x 3.43 cm)
Secure anything to your dock with a durable Cleat. Molded to slip-fit in the top of the connector sockets of the Float Sections, the Cleat bolts to the structure for a strong, reliable attachment. (Hardware included)
Solar Cleat
Model LL-SCL-CAD
8″ x 2.125″ (20.32 cm x 5.397 cm)
Secure your boat & light up the dock edge.
(Hardware included)
Dual Cleat
Model DC2000
11″ x 2.25″ (27.94 cm x 5.72 cm)
Connect the stainless steel cleat at two connector points.
(Hardware included)
2000 Series Bench
Model BH2000
Color: Gray Oak
The Connect-A-Dock Bench attachs easily to any existing 2000 Series (HP) dock system. Designed to seat two people comfortably, this Bench will take up only a little room to add alot of relaxation space.
Stationary Swim Ladder
Model SL2001
27” x 59.25” (68.6 cm x 150.5 cm)
Provide swimmers easy access in and out of the water.
Swim Ladder
Model SL1000
21″ x 86″ (53.34 cm x 218.44 cm)
Provide swimmers easy access in and out of the water with the flip-up aluminum Swim Ladder. Its hinged design lets you lift it out of the water for easy cleaning and storage. (hardware included)
Kayak Rack
Model KR1020
6′ x 18.25″(182.9 cm x 46.36 cm)
Store two Kayaks on your dock.
Flag Pole
Model AC2002MTL (Accessory Connector – metal)
Model PB2002 (Pole Bracket)
Model FP2000 (Flag Pole)
Note: Order each item seperate
The Connect-A-Dock Flag Pole attaches easily to any existing 2000 Series (HP) dock system. The flag pole is a Telescoping pole that reaches 10′, 15′ or 20′
Self-Wicking Planter
Model SWP1020
In minutes you can turn your dock into a colorful water front garden. Enjoy your favorite flowers and plants while you relax on your dock.
Fish Cleaning Station
Model FCS1020
38″ x 18″ Top(96.5 cm x 45.7 cm)
Dress fish at the waters edge after a day of fishing.
Options: Knife Rack, Hose Holder & Cup Holder
Solar Pole Light
Model LL-SKL-IR
Motion is detected the super bright LEDs light your dock. 12-watt solar panel with a 5-watt LED
Solar Diamond Light
Model SLD1020
Light up the dock edge at night.
Two Lights per package
3.36” x 1.68 x 7.73”
(8.54 cm x 4.27 cm x 19.6 cm)
Away Geese Land
Model AWG1020
Disrupts geese sleep patterns causing them to move to another pond.
Harmless to geese
Solor powered
Maintenance free
Covers 3.5 acres
Dock or Land
Floating Away Geese
Model AWGW1020
Harmless to geese
Solar powered
Maintenance free
Covers 3.5 acres
Water
Large Triangular Dock Box
Model DBT8011
Triangular Dock Box
59.25″ long x 34.5″ wide x 28.5″ high
Triangular Dock Box
Model DBT8004
Triangular Dock Box
50″ long x 29.5″ wide x 32.5″ high
Triangular Dock Box
Model DBT8000
Triangular Dock Box
48.25″ long x 28″ wide x 30″ high
Rectangular Dock Box
Model DBT8006
Rectangular Dock Box
48.25″ long x 26.5″ wide x 29″ high
Small Rectangular Dock Box
Model DBT8002
36″ x 26″ x 20″
(91.44 cm x 66.04 cm x 50.8 cm)
Long term ultraviolet inhibitors protect against sun rays
Unlike boats, dock boxes should not be made of fiberglass. Fiberglass needs waxing or it will chalk, spider web crack and retain dirt. On impact, fiberglass will crack and deform.
Trionic extra heavy-duty dock boxes are rotationally cast in a mold with impact-resistant polyethylene resin. The smooth exterior surface repels dirt without waxing.
- Extra heavy duty construction in our Dock Box
- Lockable reinforced cover
- Easy to assemble nylon hinges with stainless steel hardware
- Cover restrained with stainless steel cables
- Long term ultraviolet inhibitors protect against sun rays
Edge Bumper
Model EB1020
2.5” x 3.5” x 8’ (6.35 cm x 8.89 cm x 243.84 cm)
Provides and edge to keep items from rolling off or used as a wheel chair stop
The versatile Pole Connector slip-fits into the exposed connector sockets of Float Section and can accommodate a variety of anchoring methods, depending on your location and needs. (hardware included)
Guardrail 44"
Model GR2044B (shown) Brown
Model GR2044W White
44″ (111.76 cm)
(2 Accessory Connectors and Hardware included)
Guardrail 67"
Model GR2067B (shown) Brown
Model GR2067W White
67″ (170.18 cm)
(2 Accessory Connectors and Hardware included)
Guardrail 92"
Model GR2092B (shown) Brown
Model GR2092W White
92″ (233.68 cm)
(2 Accessory Connectors and Hardware included)
Guardrails are sturdy and easy to assemble. Three sizes correspond with modularity of dock letting you surround any size dock.
Aluminum Gangway with Handrails
Model GWA3X8 – 3′ x 8′ x 3′ 91.4 cm x 243.8 cm x 91.4 cm
Model GWA3X12 – 3′ x 12′ x 3′ 91.4 cm x 365.8 cm x 91.4 cm
Model GWA3X16 – 3′ x 16′ x 3′ 91.4 cm x 487.7 cm x 91.4 cm
Model GWA4X8 – 4′ x 8′ x 3′ 121.9 cm x 243.8 cm x 91.4 cm
Model GWA4X12 – 4′ x 12′ x 3′ 121.9 cm x 365.8 cm x 91.4 cm
Model GWA4X16 – 4′ x 16′ x 3′ 121.9 cm x 487.7 cm x 91.4 cm
Choose between three lengths, and two widths. Connect to either 1000 Series – Low Profile or 2000 Series -High Profile in minutes. Simply attach the aluminum hinge with the bolts to your dock. Handrails included (hardware included)
Gangway 4' x 4' or 4' x 8'
4′ x 4′ – Model GW1024
4” x 4” (126.9 cm x 121.92 cm)
4′ x 8′ – Model GW1028
4” x 8” (121.92 cm x 250.95 cm)
4′ x 12′ – Model GW1032
4” x 12” (121.92 cm x 365.76 cm)
Choose between three lengths, 4’ x 4’, 4’ x 8’or 4’ x 12’, with slip resistant panels that allow water to drain off and light to pass thru. Connect to either 1000 Series – Low Profile or 2000 Series -High Profile in minutes. Only one person is needed for assembly – simply attach the galvanized hinge with two bolts and two more for the light weight aluminum framing. Panel(s) are then slid into the framing slots and its ready to use. (hardware included)
Firehouse
Model FHU2000
Color: White
43.5″x 9.875″x 9.875″
(110.49 cm x 25.06 cm x 25.06 cm)
Created as a complete solution for fire and rescue needs
Mariner
Model MU2000
Color: White
Assembly Height 5 Watt 5.5″ 13.97 cm, 7 Watt 6.5″ 16.51cm, 9 Watt/14 Watt 7.5″ 19.05 cm Mounting Base and Pole 1.5 feet – 4 feet
Hatteras Utility Pedestal
Model HU2000
Color: White
31”x 13.5”x 15.5”
(78.74 cm x 34.29 cm x 39.37 cm)
Amber Lens Color
1 13 Watt Lighting
1 Photo Cell-Controlled Light
1 Breaker Lighting Protection
1 Unmetered
1 Single Phase 1/4 in. Copper Bus Bar
1 30A, 125V Receptacle – Side 1
1 30A GFI Duplex Receptacle – Side 1
1 Extra Unmetered 20A GFI Duplex Receptacle
1 Water Connection 1 3/4″
1 Utility Channel mounting base and bracket
Lighthouse Utility Pedestal
Model LHU2000
Color: White
43.75″ x 13.5″ x 15.5″
(111.13 cm x 34.29 cm x 39.37 cm)
Amber Lens Color
1 13 Watt Lighting
1 Photo Cell-Controlled Light
1 Breaker Lighting Protection
1 Unmetered
1 Single Phase 3/8 in. Copper Bus Bar
1 30A, 125V Receptacle – Side 1
1 50A, 125/250V Receptacle – Side 1
1 Extra Unmetered 20A GFI Duplex Receptacle
1 Water Connection
1 Cable TV Jack
1 Utility Channel mounting base and bracket
Newport Harbor Mate
Model NHM2000
Color: White
14.5″ x 10.5″ x 9.5″
(36.83cm x 26.67cm x 24.13cm)
Host to a variety of electrical services, contained in a compact yet strong housing
Newport Harbor Mate
In Black or White
Sizes: 2”, 3”, 4”, 6”, 8”, 10”or 12”
Anchoring
Floating Dock to Dock Bracket
Model FDA2022MTL
Connect 2000
Series float sections to other docks.
2" (5.08 cm) Dead Man Collar
Model DM2002 Note:2000 Series-Low Profile
Anchor your dock without poles. Slip the long end of the Dead Man Collar in the Pole Connector on the side of the dock and rig a weighted chain through the bottom of the collar. Fasten the chain by setting a link in the groove in the top of the collar. (Chain and weight not included)
Stiff Arm Bracket
Model SAB1020
Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.
Stiff Arm Fittings
Model SAF1020
Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.
Piling Loops
Attach your floating dock to a permanent structure with the Piling Loop. Bolt the bracket to the deck of the dock, loop the support around the piling (up to 18″ (45.72 cm) in diameter) and connect back to the bracket. Great for fluctuating water levels. (Hardware included)
- 10″ (25.4 cm) PL1010
- 12″ (30.48 cm) PL1012
- 14″ (35.56 cm) PL1014
- 16″ (40.64 cm) PL1016
- 18″ (45.72 cm) PL1018
Custom sizes available
